Cut Acrylic

Pigmented or Painted Cut Numbers & Letters

Prices & Ordering:

Tap a desired type and thickness (Depth1) number below for prices of selected heights in that group. Other heights are available.
No Hardware:
1/8"2 3/16"2 1/4"2 3/8"2 1/2" 3/4"
Studs with Flush Mount:
      3/8" 1/2" 3/4"
Studs and/or Pads - Stand-Off Mount:
1/8" 3/16" 1/4" 3/8" 1/2" 3/4"
Double-Sided Tape:
1/8" 3/16" 1/4" 3/8" 1/2" 3/4"

1. "Depth (distance from face to rear edge of piece)" may vary slightly from given values depending on material's type, availability,  manufacturer's origin & method of measurement (inches or metric), etc.

2. For 1" heights block style numbers and letters only


Acrylic numbers and letters are laser-cut from flat sheets of acrylic (40-45% recycled) in the various thicknesses mentioned in the table above. Also the sizes 1" and 1 1/2" are available - prices by phone. The pieces provide address numbers & letters with glossy faces. The returns (sides) are smoothed by the laser cutting process.

These pieces are shipped with a protective film covering the faces. Peel off this film after installation to keep a flawless appearance of your pieces. REMINDER: Cut acrylic in the 1/8" & 3/16" thicknesses is delicate. If mishandled acrylic at this depth will easily crack. When choosing a style style for these depths, we suggest using sturdy styles, such as the bold block styles. Try to avoid styles with fine details when ordering these thicknesses.

The various thicknesses do not all have the same available colors as indicated on the Solid Colors Chart. All colors from 1/8" to 1/2", are produced from extruded acrylic resin which is impact modified and pigmented in our Solid Acrylic Colors.

Acrylic in 3/4" and 1" is available as cast acrylic resin. These sizes are painted in standard Paint  Colors of your choice.

We will also paint, if feasible, all sizes of acrylic in custom colors for an additional fee.