CUT METAL OR PLASTIC ADDRESS NUMBERS & LETTERS
|
CUT METAL & ACRYLIC OPTIONS FOR VICTORIAN:
Victorian water-jet cut metal & laser-cut acrylic house numbers & letters are available in any feasible size. Sizes smaller than those listed are unavailable because their strokes are too narrow to cut.
|
|
Reminder: Cut metal or acrylic pieces are PRICED by height and depth of the character. The price for a metal or acrylic category's size is the same for any font on our cut-fonts list.
|
|
PRICES & ORDERING: In the table below click on a fraction to the right of a category name for a list of prices in that thickness for that category. Or, click the "Category Name" for a longer list of prices for all thicknesses available in that category. Note: On the order page you will be asked to reselect this font from the drop-down list.
|
|
Dimensions For Victorian Numbers |
|
Price List Links
|
|
Height |
Avg. Width
|
Min.-Max. Stroke* |
|
3" |
1.82" |
0.18" - 0.82" |
|
4 |
2.43 |
0.24 - 1.09 |
|
5 |
3.04 |
0.29 - 1.37 |
|
6 |
3.64 |
0.35 - 1.64 |
|
7 |
4.25 |
0.41 - 1.91 |
|
8 |
4.86 |
0.47 - 2.19 |
|
9 |
5.47 |
0.53 - 2.46 |
|
10 |
6.07 |
0.59 - 2.73 |
|
11 |
6.68 |
0.65 - 3.01 |
|
12 |
7.29 |
0.71 - 3.28 |
|
13 |
7.89 |
0.76 - 3.55 |
|
14 |
8.50 |
0.82 - 3.83 |
|
15 |
9.11 |
0.88 - 4.10 |
|
16 |
9.72 |
0.94 - 4.37 |
|
17 |
10.32 |
1.00 - 4.65 |
|
18 |
10.93 |
1.06 - 4.92 |
|
19 |
11.54 |
1.12 - 5.19 |
|
20 |
12.15 |
1.18 - 5.47 |
|
21 |
12.75 |
1.24 - 5.74 |
|
22 |
13.36 |
1.29 - 6.01 |
|
23 |
13.07 |
1.35 - 6.29 |
|
24 |
14.58 |
1.41 - 6.56 |
|
25 |
15.18 |
1.47 - 6.83 |
|
26 |
15.79 |
1.53 - 7.11 |
|
27 |
16.40 |
1.59 - 7.38 |
|
28 |
17.00 |
1.65 - 7.65 |
|
29 |
17.61 |
1.71 - 7.93 |
|
30 |
18.22 |
1.77 - 8.20 |
|
36 |
21.86 |
2.12 - 9.84 |
|
48 |
29.15 |
2.82 - 13.12 |
|
* "Stroke" means width of the face elements of a number or letter. |
|
|
| Available Materials | Category Names
(with hardware unless otherwise indicated) | Measures of Depth* (thickness of flat-cut material)
are Links to Prices | |
Acrylic: |
 | No Hardware: | | 1/8", | 3/16", | 1/4", | 3/8", | 1/2", | 3/4" | |
 | Flush Stud Mount: | | | | | 3/8", | 1/2", | 3/4" | |
 | Stand-Off Mount: | | 1/8", | 3/16", | 1/4", | 3/8", | 1/2", | 3/4" | |
 | Sticky Tape: | | 1/8", | 3/16", | 1/4", | 3/8", | 1/2", | 3/4" | | | Aluminum: |
 | Brushed: | 1/8" plain | 1/8", | | 1/4", | 3/8", | 1/2", | 3/4", | 1" |
 | Polished**: | | 1/8", | | 1/4", | 3/8", | 1/2", | 3/4", | 1" |
 | Enamel Paint: | | 1/8", | | 1/4", | 3/8", | 1/2", | 3/4", | 1" |
|
Powder Coated: | | 1/8", | | 1/4", | 3/8", | 1/2", | 3/4", | 1" |
 | Clear-Anodic Brushed: | |
1/8", | |
1/4", |
3/8", |
1/2", |
3/4", |
1" |
 | Clear-Anodic Polished**: | | 1/8", | | 1/4", | 3/8", | 1/2", | 3/4", | 1" |
 | Tint-Anodic Brushed: | | 1/8", | | 1/4", | 3/8", | 1/2", | 3/4", | 1" |
 | Tint-Anodic Polished**: | | 1/8", | | 1/4", | 3/8", | 1/2", | 3/4", | 1" | | Brass: |
 | Brushed: | 1/8" plain | 1/8", | | 1/4", | 3/8", | 1/2", | 3/4" | |
 | Polished**: | | 1/8", | | 1/4", | 3/8", | 1/2", | 3/4" | | | Bronze: |
 | Brushed: | 1/8" plain | 1/8", | | 1/4", | 3/8", | 1/2" | | |
 | Polished**: | | 1/8", | | 1/4", | 3/8", | 1/2" | | |
 | Oxidized: | | 1/8", | | 1/4", | 3/8", | 1/2" | | |
 | Patina: | | 1/8", | | 1/4", | 3/8", | 1/2" | | | | Copper: |
 | Brushed: | 1/8" plain | 1/8", | | 1/4", | 3/8" | | | |
 | Polished**: | | 1/8", | | 1/4", | 3/8" | | | | | Stainless Steel Alloy C304: |
 | Brushed: | 1/8" plain | 1/8", | | 1/4", | 3/8", | 1/2" | | |
 | Polished**: | | 1/8", | | 1/4", | 3/8", | 1/2" | | | | Stainless Steel Alloy C316: |
 | Brushed: | 1/8" plain | 1/8", | | 1/4", | 3/8", | 1/2" | | |
 | Polished**: | | 1/8", | | 1/4", | 3/8", | 1/2" | | |
| Steel Hot-Rolled: |
 |
Raw Rusting Steel: | 1/8" plain | 1/8", | | 1/4" | | | | | * "Depth" may vary slightly from given values depending on material's type, availability, manufacturer's origin & method of measurement (inches or metric), etc. ** Polished Metal only available for heights 2" or greater. |
|
|