House Numbers and Letters: Twentieth Century in Cut Metal or Plastic

CUT METAL & ACRYLIC OPTIONS FOR TWENTIETH CENTURY:

Twentieth Century water-jet cut metal & laser-cut acrylic house numbers & letters are available in any feasible size. Sizes smaller than those listed are unavailable because their strokes are too narrow to cut. Reminder: Cut metal or acrylic pieces are PRICED by height and depth of the character. The price for a metal or acrylic category's size is the same for any font on our cut-fonts list.

Compare Twentieth Century manufactured as:

Cast Metal

For the table below: Select a price list for all depths of an acrylic or metal category by clicking the applicable "Category" name. Or, select a price list for a single acrylic or metal depth by clicking a fraction to the right of the category name. Note: On the order page you will be asked to reselect this font from the drop-down list.

Dimensions For Twentieth Century Numbers

Price List Links

Height	Avg. Width	Min.-Max. Stroke*
1"	0.61"	0.13" - 0.17"
2	1.21	0.25 - 0.33
3	1.82	0.38 - 0.50
4	2.42	0.50 - 0.66
5	3.03	0.63 - 0.83
6	3.63	0.75 - 0.99
7	4.24	0.88 - 1.16
8	4.84	1.01 - 1.32
9	5.45	1.13 - 1.49
10	6.06	1.26 - 1.65
11	6.66	1.38 - 1.83
12	7.27	1.51 - 1.98
13	7.87	1.63 - 2.15
14	8.48	1.76 - 2.31
15	9.08	1.89 - 2.48
16	9.69	2.01 - 2.65
17	10.29	2.14 - 2.81
18	10.90	2.26 - 2.98
19	11.51	2.39 - 3.14
20	12.11	2.51 - 3.31
21	12.72	2.64 - 3.47
22	13.32	2.76 - 3.64
23	13.93	2.89 - 3.80
24	14.53	3.02 - 3.97
25	15.14	3.14 - 4.13
26	15.75	3.27 - 4.30
27	16.35	3.39 - 4.46
28	19.96	3.52 - 4.63
29	17.56	3.64 - 4.79
30	18.17	3.77 - 4.96
36	21.80	4.52 - 5.95
48	29.07	6.03 - 7.94
* Average Width is for numbers. See Cast Metals table for average width of letters. ** "Stroke" means width of the face elements of a number or letter.

Available Materials	Metal & Plastic Categories (with hardware unless otherwise indicated)		Measures of Depth* (thickness of flat-cut material) are Links to Prices
Acrylic:		No Hardware:		1/8",	3/16",	1/4",	3/8",	1/2",	3/4"
		Flush Stud Mount:					3/8",	1/2",	3/4"
		Stand-Off Mount:		1/8",	3/16",	1/4",	3/8",	1/2",	3/4"
		Sticky Tape:		1/8",	3/16",	1/4",	3/8",	1/2",	3/4"
Aluminum:		Natural Satin:	1/8" plain	1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Polished**:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Enamel Paint:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Nouveau Patina:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Clear-Anodic Satin:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Clear-Anodic Polished**:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Tint-Anodic Satin:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Tint-Anodic Polished**:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
Brass:		Natural Satin:		1/8",		1/4",	3/8",	1/2",	3/4"
Brass:		Polished**:		1/8",		1/4",	3/8",	1/2",	3/4"
Bronze:		Natural Satin:		1/8",		1/4",	3/8",	1/2"
		Polished**:		1/8",		1/4",	3/8",	1/2"
		Oxidized:		1/8",		1/4",	3/8",	1/2"
		Patina:		1/8",		1/4",	3/8",	1/2"
Copper:		Natural Satin:		1/8",		1/4",	3/8"
Copper:		Polished**:		1/8",		1/4",	3/8"
Stainless Steel Alloy C304:		Natural Satin:	1/8" plain	1/8",		1/4",	3/8",	1/2"
Stainless Steel Alloy C304:		Polished**:		1/8",		1/4",	3/8",	1/2"
Stainless Steel Alloy C316:		Natural Satin:		1/8",		1/4",	3/8",	1/2"
Stainless Steel Alloy C316:		Polished**:		1/8",		1/4",	3/8",	1/2"
Steel Hot-Rolled:		Raw Steel:		1/8",		1/4"
		Flat Black:		1/8",		1/4"
		Patina:		1/8",		1/4"
* "Depth" may vary slightly from given values depending on material's type, availability, manufacturer's origin & method of measurement (inches or metric), etc. ** Polished Metal only available for heights 2" or greater.

CUT METAL OR PLASTIC ADDRESS NUMBERS & LETTERS