House Numbers - Palatino Semi-Bold in Cut Metal & Plastic

Differences Between Cast/Molded & Cut Metals or Plastics for House Number or Letters

^NEW

CUT METAL OR PLASTIC ADDRESS NUMBERS & LETTERS

CUT METAL & PLASTIC OPTIONS FOR PALATINO SEMI-BOLD:

Palatino Semi-Bold water-jet cut metal & laser-cut acrylic house numbers & letters are available in any feasible size. Sizes smaller than those listed are unavailable because their strokes are too narrow to cut.

Compare: Palatino Semi-Bold cast-metal sizes, finishes, & prices.

Dimensions Table For Numbers

Reminder: Cut plastic & metal are PRICED by height and depth of the plastic or metal. The price for a plastic or a metal finish's size is the same for any font on our cut-fonts list.

Select a price list for all depths of acrylic or for a metal finish by clicking the applicable category name. Or, select a price list for a single metal or plastic depth by clicking a fraction following the chip's name. On the order page you will be asked to choose one of our fonts from our cut materials font index.

Height	Avg. Width	Min.- Max. Stroke *
3"	2.06"	0.16" - 0.72"
4	2.75	0.21 - 0.96
5	3.44	0.27 - 1.21
6	4.13	0.32 - 1.45
7	4.81	0.37 - 1.69
8	5.50	0.42 - 1.93
9	6.19	0.48 - 2.17
10	6.88	0.53 - 2.41
11	7.56	0.58 - 2.65
12	8.25	0.64 - 2.89
13	8.94	0.69 - 3.13
14	9.63	0.74 - 3.37
15	10.31	0.80 - 3.62
16	11.00	0.85 - 3.86
17	11.69	0.90 - 4.10
18	12.38	0.95 - 4.34
19	13.06	1.01 - 4.58
20	13.75	1.06 - 4.82
21	14.44	1.11 - 5.06
22	15.13	1.17 - 5.30
23	15.82	1.22 - 5.54
24	16.50	1.27 - 5.78
25	17.19	1.33 - 6.03
26	17.88	1.38 - 6.27
27	18.57	1.43 - 6.51
28	19.25	1.48 - 6.75
29	19.94	1.54 - 6.99
30	20.63	1.59 - 7.23
36	24.75	1.91 - 8.68
48	33.01	2.54 - 11.57
* "Stroke" means width of the face elements of a number or letter.

Available Materials	Metal & Plastic Categories		*Depth Fractions are Links to Prices**
Acrylic:		No Hardware:		1/8",	3/16",	1/4",	3/8",	1/2",	3/4"
		Flush Stud Mount:					3/8",	1/2",	3/4"
		Stand-Off Mount:		1/8",	3/16",	1/4",	3/8",	1/2",	3/4"
		Sticky Tape:		1/8",	3/16",	1/4",	3/8",	1/2",	3/4"
Aluminum:		Natural Satin:	1/8" plain"	1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Polished:**		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Enamel Paint:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Nouveau Patina:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Clear-Anodic Satin:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Clear-Anodic Polished:**		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Tint-Anodic Satin:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Tint-Anodic Polished:**		1/8",		1/4",	3/8",	1/2",	3/4",	1"
Brass:		Natural Satin:		1/8",		1/4",	3/8",	1/2",	3/4"
Brass:		Polished:**		1/8",		1/4",	3/8",	1/2",	3/4"
Bronze:		Natural Satin:		1/8",		1/4",	3/8",	1/2"
		Polished:**		1/8",		1/4",	3/8",	1/2"
		Oxidized:		1/8",		1/4",	3/8",	1/2"
		Patina:		1/8",		1/4",	3/8",	1/2"
Copper:		Natural Satin:		1/8",		1/4",	3/8"
Copper:		Polished:**		1/8",		1/4",	3/8"
Stainless Steel Alloy C304:		Natural Satin:		1/8",		1/4",	3/8",	1/2"
Stainless Steel Alloy C304:		Polished:**		1/8",		1/4",	3/8",	1/2"
Stainless Steel Alloy C316:		Natural Satin:		1/8",		1/4",	3/8",	1/2"
Stainless Steel Alloy C316:		Polished:**		1/8",		1/4",	3/8",	1/2"
Steel Hot-Rolled:		Raw Steel:		1/8",		1/4"
		Flat Black:		1/8",		1/4"
		Patina:		1/8",		1/4"
* "Depth" may vary slightly from given values depending on material's type, availability, manufacturer's origin & method of measurement (inches or metric), etc. ** Polished Metal only available for heights 2" or greater.