House Numbers - Palatino Bold in Cut Metal & Plastic

Differences Between Cast/Molded & Cut Metals or Plastics for House Number or Letters

^NEW

CUT METAL OR PLASTIC ADDRESS NUMBERS & LETTERS

CUT METAL & PLASTIC OPTIONS FOR PALATINO BOLD:

Palatino Bold water-jet cut metal & laser-cut acrylic house numbers & letters are available in any feasible size. Sizes smaller than those listed are unavailable because their strokes are too narrow to cut.

Dimensions Table For Numbers

Reminder: Cut plastic & metal are PRICED by height and depth of the plastic or metal. The price for a plastic or a metal finish's size is the same for any font on our cut-fonts list.

Select a price list for all depths of acrylic or for a metal finish by clicking the applicable category name. Or, select a price list for a single metal or plastic depth by clicking a fraction following the chip's name. On the order page you will be asked to choose one of our fonts from our cut materials font index.

Height	Avg. Width	Min.- Max. Stroke *
2"	1.48"	0.19" - 0.52"
3	2.22	0.28 - 0.78
4	2.96	0.37 - 1.04
5	3.70	0.47 - 1.30
6	4.44	0.56 - 1.56
7	5.18	0.65 - 1.81
8	5.92	0.75 - 2.07
9	6.66	0.84 - 2.33
10	7.40	0.93 - 2.59
11	8.13	1.02 - 2.85
12	8.87	1.12 - 3.11
13	9.61	1.21 - 3.37
14	10.35	1.30 - 3.63
15	11.09	1.40 - 3.89
16	11.83	1.49 - 4.15
17	12.57	1.58 - 4.41
18	13.31	1.68 - 4.67
19	14.05	1.77 - 4.92
20	14.79	1.86 - 5.18
21	15.53	1.96 - 5.44
22	16.27	2.05 - 5.70
23	17.01	2.14 - 5.96
24	17.75	2.24 - 6.22
25	18.49	2.33 - 6.48
26	19.23	2.42 - 6.74
27	19.97	2.52 - 7.00
28	20.71	2.61 - 7.26
29	21.45	2.70 - 7.52
30	22.49	2.80 - 7.78
36	25.88	3.35 - 9.33
48	35.50	4.47 - 12.44
* "Stroke" means width of the face elements of a number or letter.

Available Materials	Metal & Plastic Categories		*Depth Fractions are Links to Prices**
Acrylic:		No Hardware:		1/8",	3/16",	1/4",	3/8",	1/2",	3/4"
		Flush Stud Mount:					3/8",	1/2",	3/4"
		Stand-Off Mount:		1/8",	3/16",	1/4",	3/8",	1/2",	3/4"
		Sticky Tape:		1/8",	3/16",	1/4",	3/8",	1/2",	3/4"
Aluminum:		Natural Satin:	1/8" plain"	1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Polished:**		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Enamel Paint:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Nouveau Patina:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Clear-Anodic Satin:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Clear-Anodic Polished:**		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Tint-Anodic Satin:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Tint-Anodic Polished:**		1/8",		1/4",	3/8",	1/2",	3/4",	1"
Brass:		Natural Satin:		1/8",		1/4",	3/8",	1/2",	3/4"
Brass:		Polished:**		1/8",		1/4",	3/8",	1/2",	3/4"
Bronze:		Natural Satin:		1/8",		1/4",	3/8",	1/2"
		Polished:**		1/8",		1/4",	3/8",	1/2"
		Oxidized:		1/8",		1/4",	3/8",	1/2"
		Patina:		1/8",		1/4",	3/8",	1/2"
Copper:		Natural Satin:		1/8",		1/4",	3/8"
Copper:		Polished:**		1/8",		1/4",	3/8"
Stainless Steel Alloy C304:		Natural Satin:		1/8",		1/4",	3/8",	1/2"
Stainless Steel Alloy C304:		Polished:**		1/8",		1/4",	3/8",	1/2"
Stainless Steel Alloy C316:		Natural Satin:		1/8",		1/4",	3/8",	1/2"
Stainless Steel Alloy C316:		Polished:**		1/8",		1/4",	3/8",	1/2"
Steel Hot-Rolled:		Raw Steel:		1/8",		1/4"
		Flat Black:		1/8",		1/4"
		Patina:		1/8",		1/4"
* "Depth" may vary slightly from given values depending on material's type, availability, manufacturer's origin & method of measurement (inches or metric), etc. ** Polished Metal only available for heights 2" or greater.