House Numbers - Optima Semi-Bold in Cut Metal & Plastic

Differences Between Cast/Molded & Cut Metals or Plastics for House Number or Letters

^NEW

CUT METAL OR PLASTIC ADDRESS NUMBERS & LETTERS

CUT METAL & PLASTIC OPTIONS FOR OPTIMA SEMI-BOLD:

Optima Semi-Bold water-jet cut metal & laser-cut acrylic house numbers & letters are available in any feasible size. Sizes smaller than those listed are unavailable because their strokes are too narrow to cut.

Compare: 1. Optima Semi-Bold cast-metal sizes, finishes, & prices; or, 2. Optima Semi-Bold formed-plastic sizes & prices.

Dimensions Table For Numbers

Reminder: Cut plastic & metal are PRICED by height and depth of the plastic or metal. The price for a plastic or a metal finish's size is the same for any font on our cut-fonts list.

Select a price list for all depths of acrylic or for a metal finish by clicking the applicable category name. Or, select a price list for a single metal or plastic depth by clicking a fraction following the chip's name. On the order page you will be asked to choose one of our fonts from our cut materials font index.

Height	Avg. Width	Min.- Max. Stroke *
2"	1.37"	0.14" - 0.51"
3	2.06	0.21 - 0.76
4	2.74	0.28 - 1.01
5	3.43	0.35 - 1.27
6	4.11	0.41 - 1.52
7	4.80	0.48 - 1.77
8	5.48	0.55 - 2.02
9	6.17	0.62 - 2.28
10	6.86	0.69 - 2.53
11	7.54	0.76 - 2.78
12	8.23	0.83 - 3.04
13	8.91	0.90 - 3.29
14	9.60	0.97 - 3.54
15	10.28	1.04 - 3.80
16	10.97	1.10 - 4.05
17	11.65	1.17 - 4.30
18	12.34	1.24 - 4.55
19	13.03	1.31 - 4.81
20	13.71	1.38 - 5.06
21	14.40	1.45 - 5.31
22	15.08	1.52 - 5.57
23	15.77	1.59 - 5.82
24	16.45	1.66 - 6.07
25	17.14	1.73 - 6.33
26	17.82	1.79 - 6.58
27	18.51	1.86 - 6.83
28	19.20	1.93 - 7.08
29	19.88	2.00 - 7.34
30	20.57	2.07 - 7.59
36	24.68	2.48 - 9.11
48	32.91	3.31 - 12.14
* "Stroke" means width of the face elements of a number or letter.

Available Materials	Metal & Plastic Categories		*Depth Fractions are Links to Prices**
Acrylic:		No Hardware:		1/8",	3/16",	1/4",	3/8",	1/2",	3/4"
		Flush Stud Mount:					3/8",	1/2",	3/4"
		Stand-Off Mount:		1/8",	3/16",	1/4",	3/8",	1/2",	3/4"
		Sticky Tape:		1/8",	3/16",	1/4",	3/8",	1/2",	3/4"
Aluminum:		Natural Satin:	1/8" plain"	1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Polished:**		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Enamel Paint:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Nouveau Patina:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Clear-Anodic Satin:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Clear-Anodic Polished:**		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Tint-Anodic Satin:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Tint-Anodic Polished:**		1/8",		1/4",	3/8",	1/2",	3/4",	1"
Brass:		Natural Satin:		1/8",		1/4",	3/8",	1/2",	3/4"
Brass:		Polished:**		1/8",		1/4",	3/8",	1/2",	3/4"
Bronze:		Natural Satin:		1/8",		1/4",	3/8",	1/2"
		Polished:**		1/8",		1/4",	3/8",	1/2"
		Oxidized:		1/8",		1/4",	3/8",	1/2"
		Patina:		1/8",		1/4",	3/8",	1/2"
Copper:		Natural Satin:		1/8",		1/4",	3/8"
Copper:		Polished:**		1/8",		1/4",	3/8"
Stainless Steel Alloy C304:		Natural Satin:		1/8",		1/4",	3/8",	1/2"
Stainless Steel Alloy C304:		Polished:**		1/8",		1/4",	3/8",	1/2"
Stainless Steel Alloy C316:		Natural Satin:		1/8",		1/4",	3/8",	1/2"
Stainless Steel Alloy C316:		Polished:**		1/8",		1/4",	3/8",	1/2"
Steel Hot-Rolled:		Raw Steel:		1/8",		1/4"
		Flat Black:		1/8",		1/4"
		Patina:		1/8",		1/4"
* "Depth" may vary slightly from given values depending on material's type, availability, manufacturer's origin & method of measurement (inches or metric), etc. ** Polished Metal only available for heights 2" or greater.