House Numbers - Herman Italic in Cut Metal & Plastic

Differences Between Cast/Molded & Cut Metals or Plastics for House Number or Letters

^NEW

CUT METAL OR PLASTIC ADDRESS NUMBERS & LETTERS

CUT METAL & PLASTIC OPTIONS FOR HERMAN ITALIC:

Herman Italic water-jet cut metal & laser-cut acrylic house numbers & letters are available in any feasible size. Sizes smaller than those listed are unavailable because their strokes are too narrow to cut.

Compare: Herman Italic formed-plastic sizes & prices.

Dimensions Table For Numbers

Reminder: Cut plastic & metal are PRICED by height and depth of the plastic or metal. The price for a plastic or a metal finish's size is the same for any font on our cut-fonts list.

Select a price list for all depths of acrylic or for a metal finish by clicking the applicable category name. Or, select a price list for a single metal or plastic depth by clicking a fraction following the chip's name. On the order page you will be asked to choose one of our fonts from our cut materials font index.

Height	Avg. Width	Min.- Max. Stroke *
2"	1.92"	0.22" - 0.65"
3	2.88	0.33 - 0.97
4	3.85	0.44 - 1.30
5	4.81	0.55 - 1.62
6	5.77	0.66 - 1.94
7	6.73	0.77 - 2.27
8	7.69	0.88 - 2.59
9	8.65	0.99 - 2.92
10	9.62	1.11 - 3.24
11	10.58	1.22 - 3.56
12	11.54	1.33 - 3.89
13	12.50	1.44 - 4.21
14	13.46	1.55 - 4.54
15	14.42	1.66 - 4.86
16	15.39	1.77 - 5.18
17	16.35	1.88 - 5.51
18	17.31	1.99 - 5.83
19	18.27	2.10 - 6.16
20	19.23	2.21 - 6.48
21	20.19	2.32 - 6.80
22	21.16	2.43 - 7.13
23	22.12	2.54 - 7.45
24	23.08	2.65 - 7.78
25	24.04	2.76 - 8.10
26	25.00	2.87 - 8.42
27	25.96	2.98 - 8.75
28	26.92	3.09 - 9.07
29	27.89	3.20 - 9.40
30	28.85	3.32 - 9.72
36	34.62	3.98 - 11.66
48	46.16	5.30 - 15.55
* "Stroke" means width of the face elements of a number or letter.

Available Materials	Metal & Plastic Categories		*Depth Fractions are Links to Prices**
Acrylic:		No Hardware:		1/8",	3/16",	1/4",	3/8",	1/2",	3/4"
		Flush Stud Mount:					3/8",	1/2",	3/4"
		Stand-Off Mount:		1/8",	3/16",	1/4",	3/8",	1/2",	3/4"
		Sticky Tape:		1/8",	3/16",	1/4",	3/8",	1/2",	3/4"
Aluminum:		Natural Satin:	1/8" plain"	1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Polished:**		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Enamel Paint:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Nouveau Patina:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Clear-Anodic Satin:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Clear-Anodic Polished:**		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Tint-Anodic Satin:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Tint-Anodic Polished:**		1/8",		1/4",	3/8",	1/2",	3/4",	1"
Brass:		Natural Satin:		1/8",		1/4",	3/8",	1/2",	3/4"
Brass:		Polished:**		1/8",		1/4",	3/8",	1/2",	3/4"
Bronze:		Natural Satin:		1/8",		1/4",	3/8",	1/2"
		Polished:**		1/8",		1/4",	3/8",	1/2"
		Oxidized:		1/8",		1/4",	3/8",	1/2"
		Patina:		1/8",		1/4",	3/8",	1/2"
Copper:		Natural Satin:		1/8",		1/4",	3/8"
Copper:		Polished:**		1/8",		1/4",	3/8"
Stainless Steel Alloy C304:		Natural Satin:		1/8",		1/4",	3/8",	1/2"
Stainless Steel Alloy C304:		Polished:**		1/8",		1/4",	3/8",	1/2"
Stainless Steel Alloy C316:		Natural Satin:		1/8",		1/4",	3/8",	1/2"
Stainless Steel Alloy C316:		Polished:**		1/8",		1/4",	3/8",	1/2"
Steel Hot-Rolled:		Raw Steel:		1/8",		1/4"
		Flat Black:		1/8",		1/4"
		Patina:		1/8",		1/4"
* "Depth" may vary slightly from given values depending on material's type, availability, manufacturer's origin & method of measurement (inches or metric), etc. ** Polished Metal only available for heights 2" or greater.