House Numbers - Frutiger in Cut Metal & Plastic

Differences Between Cast/Molded & Cut Metals or Plastics for House Number or Letters

^NEW

CUT METAL OR PLASTIC ADDRESS NUMBERS & LETTERS

CUT METAL & PLASTIC OPTIONS FOR FRUTIGER 75:

Frutiger 75 water-jet cut metal & laser-cut acrylic house numbers & letters are available in any feasible size. Sizes are "unavailable" when strokes are too narrow to cut.

Dimensions Table For Numbers

Reminder: Cut plastic & metal are PRICED by height and depth of the plastic or metal. The price for a plastic or a metal finish's size is the same for any font on our cut-fonts list.

Select a price list for all depths of acrylic or for a metal finish by clicking the applicable category name. Or, select a price list for a single metal or plastic depth by clicking a fraction following the chip's name. On the order page you will be asked to choose one of our fonts from our cut materials font index.

Height	Avg. Width	Min.- Max. Stroke *
1"	.074"	0.17" - 0.27"
2	1.48	0.34 - 0.54
3	2.21	0.51 - 0.81
4	2.95	0.67 - 1.08
5	3.69	0.84 - 1.35
6	4.43	1.01 - 1.62
7	5.16	1.18 - 1.88
8	5.90	1.35 - 2.15
9	6.64	1.52 - 2.42
10	7.38	1.68 - 2.69
11	8.11	1.85 - 2.96
12	8.85	2.02 - 3.23
13	9.59	2.19 - 3.50
14	10.33	2.36 - 3.77
15	11.06	2.53 - 4.04
16	11.80	2.69 - 4.31
17	12.54	2.86 - 4.58
18	13.28	3.03 - 4.85
19	14.01	3.20 - 5.11
20	14.75	3.37 - 5.38
21	15.49	3.54 - 5.65
22	16.23	3.70 - 5.92
23	16.96	3.87 - 6.19
24	17.70	4.04 - 6.46
25	18.44	4.21 - 6.73
26	19.18	4.38 - 7.00
27	19.91	4.55 - 7.27
28	20.65	4.71 - 7.54
29	21.39	4.88 - 7.81
30	22.13	5.05 - 8.08
36	26.55	6.06 - 9.69
48	35.40	8.08 - 12.92
* "Stroke" means width of the face elements of a number or letter.

Available Materials	Metal & Plastic Categories		*Depth Fractions are Links to Prices**
Acrylic:		No Hardware:		1/8",	3/16",	1/4",	3/8",	1/2",	3/4"
		Flush Stud Mount:					3/8",	1/2",	3/4"
		Stand-Off Mount:		1/8",	3/16",	1/4",	3/8",	1/2",	3/4"
		Sticky Tape:		1/8",	3/16",	1/4",	3/8",	1/2",	3/4"
Aluminum:		Natural Satin:	1/8" plain"	1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Polished:**		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Enamel Paint:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Nouveau Patina:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Clear-Anodic Satin:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Clear-Anodic Polished:**		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Tint-Anodic Satin:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Tint-Anodic Polished:**		1/8",		1/4",	3/8",	1/2",	3/4",	1"
Brass:		Natural Satin:		1/8",		1/4",	3/8",	1/2",	3/4"
Brass:		Polished:**		1/8",		1/4",	3/8",	1/2",	3/4"
Bronze:		Natural Satin:		1/8",		1/4",	3/8",	1/2"
		Polished:**		1/8",		1/4",	3/8",	1/2"
		Oxidized:		1/8",		1/4",	3/8",	1/2"
		Patina:		1/8",		1/4",	3/8",	1/2"
Copper:		Natural Satin:		1/8",		1/4",	3/8"
Copper:		Polished:**		1/8",		1/4",	3/8"
Stainless Steel Alloy C304:		Natural Satin:		1/8",		1/4",	3/8",	1/2"
Stainless Steel Alloy C304:		Polished:**		1/8",		1/4",	3/8",	1/2"
Stainless Steel Alloy C316:		Natural Satin:		1/8",		1/4",	3/8",	1/2"
Stainless Steel Alloy C316:		Polished:**		1/8",		1/4",	3/8",	1/2"
Steel Hot-Rolled:		Raw Steel:		1/8",		1/4"
		Flat Black:		1/8",		1/4"
		Patina:		1/8",		1/4"
* "Depth" may vary slightly from given values depending on material's type, availability, manufacturer's origin & method of measurement (inches or metric), etc. ** Polished Metal only available for heights 2" or greater.