House Numbers and Letters: Eurostyle Bold Extended Italic in Cut Metal or Plastic

CUT METAL & ACRYLIC OPTIONS FOR EUROSTYLE BOLD EXTENDED ITALIC:

Eurostyle Bold Extended Italic water-jet cut metal & laser-cut acrylic house numbers & letters are available in any feasible size. Sizes smaller than those listed are unavailable because their strokes are too narrow to cut. Reminder: Cut metal or acrylic pieces are PRICED by height and depth of the character. The price for a metal or acrylic category's size is the same for any font on our cut-fonts list.

Compare Eurostyle Bold Extended Italic manufactured as:

Formed Plastic.

For the table below: Select a price list for all depths of an acrylic or metal category by clicking the applicable "Category" name. Or, select a price list for a single acrylic or metal depth by clicking a fraction to the right of the category name. Note: On the order page you will be asked to reselect this font from the drop-down list.

Dimensions For Clearview-One Bold Numbers

Price List Links

Height	Avg. Width	Min.-Max. Stroke*
1"	1.24"	0.19" - 0.29"
2	2.47	0.38 - 0.59
3	3.71	0.57 - 0.88
4	4.94	0.76 - 1.17
5	6.18	0.95 - 1.46
6	7.41	1.14 - 1.76
7	8.65	1.33 - 2.05
8	9.88	1.52 - 2.34
9	11.12	1.71 - 2.64
10	12.35	1.90 - 2.93
11	13.59	2.09 - 3.22
12	14.82	2.28 - 3.51
13	16.06	2.47 - 3.81
14	17.11	2.66 - 4.10
15	18.53	2.85 - 4.39
16	19.76	3.04 - 4.69
17	21.00	3.23 - 4.98
18	22.23	3.42 - 5.27
19	23.47	3.61 - 5.56
20	24.70	3.80 - 5.86
21	25.94	3.99 - 6.15
22	27.17	4.18 - 6.44
23	28.41	4.37 - 6.74
24	29.64	4.56 - 7.03
25	30.88	4.75 - 7.32
26	32.11	4.94 - 7.61
27	33.35	5.13 - 7.97
28	35.38	5.32 - 8.20
29	37.91	5.51 - 8.49
30	40.52	5.70 - 8.79
36	44.46	6.83 - 10.54
48	59.28	9.11 - 14.06
* Average Width is for numbers. See Formed Plastic table for average width of letters. ** "Stroke" means width of the face elements of a number or letter.

Available Materials	Metal & Plastic Categories (with hardware unless otherwise indicated)		Measures of Depth* (thickness of flat-cut material) are Links to Prices
Acrylic:		No Hardware:		1/8",	3/16",	1/4",	3/8",	1/2",	3/4"
		Flush Stud Mount:					3/8",	1/2",	3/4"
		Stand-Off Mount:		1/8",	3/16",	1/4",	3/8",	1/2",	3/4"
		Sticky Tape:		1/8",	3/16",	1/4",	3/8",	1/2",	3/4"
Aluminum:		Natural Satin:	1/8" plain	1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Polished**:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Enamel Paint:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Nouveau Patina:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Clear-Anodic Satin:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Clear-Anodic Polished**:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Tint-Anodic Satin:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Tint-Anodic Polished**:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
Brass:		Natural Satin:		1/8",		1/4",	3/8",	1/2",	3/4"
Brass:		Polished**:		1/8",		1/4",	3/8",	1/2",	3/4"
Bronze:		Natural Satin:		1/8",		1/4",	3/8",	1/2"
		Polished**:		1/8",		1/4",	3/8",	1/2"
		Oxidized:		1/8",		1/4",	3/8",	1/2"
		Patina:		1/8",		1/4",	3/8",	1/2"
Copper:		Natural Satin:		1/8",		1/4",	3/8"
Copper:		Polished**:		1/8",		1/4",	3/8"
Stainless Steel Alloy C304:		Natural Satin:	1/8" plain	1/8",		1/4",	3/8",	1/2"
Stainless Steel Alloy C304:		Polished**:		1/8",		1/4",	3/8",	1/2"
Stainless Steel Alloy C316:		Natural Satin:		1/8",		1/4",	3/8",	1/2"
Stainless Steel Alloy C316:		Polished**:		1/8",		1/4",	3/8",	1/2"
Steel Hot-Rolled:		Raw Steel:		1/8",		1/4"
		Flat Black:		1/8",		1/4"
		Patina:		1/8",		1/4"
* "Depth" may vary slightly from given values depending on material's type, availability, manufacturer's origin & method of measurement (inches or metric), etc. ** Polished Metal only available for heights 2" or greater.

CUT METAL OR PLASTIC ADDRESS NUMBERS & LETTERS