House Numbers and Letters: Bodoni Italic in Cut Metal or Plastic

CUT METAL & ACRYLIC OPTIONS FOR BODONI ITALIC:

Bodoni Italic water-jet cut metal & laser-cut acrylic house numbers & letters are available in any feasible size. Sizes smaller than those listed are unavailable because their strokes are too narrow to cut. Reminder: Cut metal or acrylic pieces are PRICED by height and depth of the character. The price for a metal or acrylic category's size is the same for any font on our cut-fonts list.

Compare Bodonic Italic manufactured as:

Formed Plastic

For the table below: Select a price list for all depths of an acrylic or metal category by clicking the applicable "Category" name. Or, select a price list for a single acrylic or metal depth by clicking a fraction to the right of the category name. Note: On the order page you will be asked to reselect this font from the drop-down list.

Dimensions For Bodoni Italic Numbers

Price List Links

Height	Avg. Width*	Min.-Max. Stroke**
2"	1.86"	0.16" - 0.76"
3	2.78	0.24 - 1.14
4	3.71	0.32 - 1.52
5	4.64	0.41 - 1.90
6	5.57	0.57 - 2.66
7	6.50	0.57 - 2.66
8	7.42	0.65 - 3.03
9	8.35	0.73 - 3.41
10	9.28	0.81 - 3.79
11	10.21	0.89 - 4.17
12	11.14	0.97 - 4.55
13	12.06	1.06 - 4.93
14	12.99	1.14 - 5.31
15	13.92	1.22 - 5.69
16	14.85	1.30 - 6.07
17	15.78	1.38 - 6.45
18	16.70	1.46 - 6.83
19	17.63	1.54 - 7.21
20	18.56	1.46 - 7.59
21	19.49	1.70 - 7.97
22	20.42	1.79 - 8.35
23	21.34	1.87 - 8.72
24	22.27	1.95 - 9.10
25	23.20	2.03 - 9.48
26	24.13	2.11 - 9.86
27	25.06	2.19 - 10.24
28	25.98	2.27 - 10.62
29	26.91	2.35 - 11.00
30	27.84	2.44 - 11.38
36	33.41	2.92 - 13.66
48	44.54	3.90 - 18.21
* Average Width is for numbers. See Formed Plastics table for average width of letters. ** "Stroke" means width of the face elements of a number or letter.

Available Materials	Metal & Plastic Categories (with hardware unless otherwise indicated)		Measures of Depth* (thickness of flat-cut material) are Links to Prices
Acrylic:		No Hardware:		1/8",	3/16",	1/4",	3/8",	1/2",	3/4"
		Flush Stud Mount:					3/8",	1/2",	3/4"
		Stand-Off Mount:		1/8",	3/16",	1/4",	3/8",	1/2",	3/4"
		Sticky Tape:		1/8",	3/16",	1/4",	3/8",	1/2",	3/4"
Aluminum:		Natural Satin:	1/8" plain	1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Polished**:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Enamel Paint:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Nouveau Patina:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Clear-Anodic Satin:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Clear-Anodic Polished**:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Tint-Anodic Satin:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
		Tint-Anodic Polished**:		1/8",		1/4",	3/8",	1/2",	3/4",	1"
Brass:		Natural Satin:		1/8",		1/4",	3/8",	1/2",	3/4"
Brass:		Polished**:		1/8",		1/4",	3/8",	1/2",	3/4"
Bronze:		Natural Satin:		1/8",		1/4",	3/8",	1/2"
		Polished**:		1/8",		1/4",	3/8",	1/2"
		Oxidized:		1/8",		1/4",	3/8",	1/2"
		Patina:		1/8",		1/4",	3/8",	1/2"
Copper:		Natural Satin:		1/8",		1/4",	3/8"
Copper:		Polished**:		1/8",		1/4",	3/8"
Stainless Steel Alloy C304:		Natural Satin:	1/8" plain	1/8",		1/4",	3/8",	1/2"
Stainless Steel Alloy C304:		Polished**:		1/8",		1/4",	3/8",	1/2"
Stainless Steel Alloy C316:		Natural Satin:		1/8",		1/4",	3/8",	1/2"
Stainless Steel Alloy C316:		Polished**:		1/8",		1/4",	3/8",	1/2"
Steel Hot-Rolled:		Raw Steel:		1/8",		1/4"
		Flat Black:		1/8",		1/4"
		Patina:		1/8",		1/4"
* "Depth" may vary slightly from given values depending on material's type, availability, manufacturer's origin & method of measurement (inches or metric), etc. ** Polished Metal only available for heights 2" or greater.

CUT METAL OR PLASTIC ADDRESS NUMBERS & LETTERS